6 syllables: Po, ten, ti, o, me, ter. Stress on ten.
poh-TEN-tee-oh-mit-ur
/poˈtɛn.ti.oʊ.mɪ.tɚ/
Potentiometer is pronounced poh-TEN-tee-oh-mit-ur (/poˈtɛn.ti.oʊ.mɪ.tɚ/). It has six syllables (Po-ten-ti-o-me-ter), with the stress on "ten". A potentiometer is a three-terminal resistor with a movable contact that varies resistance, typically used to adjust voltage or signal levels in electronic circuits. Commonly found as a knob or slider, it converts a physical rotation or position into an electrical resistance value. It is essential for fine-tuning audio, calibration, and user-controlled gain in devices.
nounA potentiometer is a three-terminal resistor with a movable contact that varies resistance, typically used to adjust voltage or signal levels in electronic circuits. Commonly found as a knob or slider, it converts a physical rotation or position into an electrical resistance value. It is essential for fine-tuning audio, calibration, and user-controlled gain in devices.
"Turn the volume knob to set the potentiometer’s resistance."
"Calibration required adjusting the potentiometer until the meter reads the correct level."
"Replace the faulty potentiometer to restore the device’s adjustable gain."
US/UK/AU pronunciation centers the stress on the third syllable: po-TEN-ti-O-me-ter with a long ee in -tiː- and a clear ‘o’ in -o- before -meter. IPA: US poʊˌtenˈtiːˌɒmətər (or poʊˌtenˈtiːɚmɛtər in some dialects), UK pəʊˌtenˈtiːɒmətə, AU pɔːˈtenːʃiːɒmətə. Start with /poʊ/ or /pəʊ/, then /ˌtenˈtiː/, and finish with /əˌmɛtər/ or /ɪtə/. Place the tongue high for the /tiː/ and keep the /t/ clear; the final /ər/ reduces in non-rhotic accents.
Common errors: stressing the wrong syllable (po-TEN-ti-o-me-ter); accidentally turning it into ‘poten-tee-OM-e-ter’ or rushing the middle syllables. Another error is mispronouncing the /tiː/ as /tɪ/ or collapsing the -omer ending to -omer as in ‘potentiometer’. Correct by isolating syllables: po- ten- TI- o- me- ter, and practice with the first two consonants /poʊ/ or /pəʊ/, then the long /tiː/ before /ə/ and /mɛtər/.
US tends to pronounce /poʊˌtenˈtiːəˌmɛtər/ with a clear /r/ at end and longer diphthongs; UK often uses /pəʊˌtenˈtiːɒmətə/ with nonrhotic /r/ and a shorter /ɒ/ in -om-; AU commonly merges vowels closer to /pəˈtenːʃiːɒmətə/ with a clipped /t/ and distinctive /ɪə/ diphthongs in some regions. In all, the stressed syllable remains around the third syllable; rhoticity and vowel quality shift the surrounding vowels.
The difficulty lies in the multi-syllabic structure and the long, unstressed sequence around -ti-o- and -meter. The /tiː/ cluster can blur into /tɪ/ for some speakers, and the final -meter can sound like -mətɚ or -mɛtə depending on accent. Mastery comes from emphasizing the strong /tiː/ and keeping the wiper-like tongue position for the -ti- sequence while not reducing the final -ter too much.
No; the 'ti' is typically a 'ti' as in 'ten' or 'tea' depending on the syllable and accent. It should be /tiː/ or /tɪ/ in some quick speech variants, but not /ti/ as in 'ty'. The correct articulation places the tongue at the alveolar ridge for /t/ and then a long /iː/ or short /ɪ/ depending on the dialect, followed by an unstressed -o- and -meter. Practicing the break po-ten-TI-o-me-ter helps fix the proper sequence.
🗣️ Voice search tip: These questions are optimized for voice search. Try asking your voice assistant any of these questions about "Potentiometer"!
Potentiometer derives from the combination of the Latin potens, meaning 'powerful, able,' and the New Latin -meter, from Greek metron 'measure.' The term implies a device that measures or modulates power by adjusting resistance. The concept emerged in the early 20th century with the advent of variable resistors used in radio and control systems. The first practical potentiometers combined a fixed resistive element with a sliding contact (wiper) to create a tunable voltage divider. The word enters English in technical literature around the 1920s as electronics matured, with ‘poten-’ reflecting power or potential, and ‘-meter’ indicating measurement or control. Over time, potentiometers expanded into consumer electronics, instrumentation, and automotive controls, while specialized forms like trim pots and digital potentiometers broaden their naming conventions. The term has remained stable in engineering discourse, even as manufacturing and integration methods evolved (e.g., surface-mount potentiometers, digital emulation). Modern usage preserves the core meaning: a variable resistor used for adjusting electrical signals and calibrations.
💡 Etymology tip: Understanding word origins can help you remember pronunciation patterns and recognize related words in the same language family.
Help others use "Potentiometer" correctly by contributing grammar tips, common mistakes, and context guidance.
💡 These words have similar meanings to "Potentiometer" and can often be used interchangeably.
🔄 These words have opposite meanings to "Potentiometer" and show contrast in usage.
📚 Vocabulary tip: Learning synonyms and antonyms helps you understand nuanced differences in meaning and improves your word choice in speaking and writing.
Words that rhyme with "Potentiometer"
-tor sounds
Practice with these rhyming pairs to improve your pronunciation consistency:
🎵 Rhyme tip: Practicing with rhyming words helps you master similar sound patterns and improves your overall pronunciation accuracy.
