2 syllables: sol, dered. Stress on sol.
SOL-duhrd
/ˈsɒldərd/
soldered is pronounced SOL-duhrd (/ˈsɒldərd/). It has two syllables (sol-dered), with the stress on "sol". Soldered is the past participle/adjective form of solder, meaning joined or fixed with solder, typically by melting metal to create a bond. It describes something that has been connected with solder, often used in electronics or plumbing contexts. The term emphasizes the result of the soldering process rather than the act itself.
Soldered is the past participle/adjective form of solder, meaning joined or fixed with solder, typically by melting metal to create a bond. It describes something that has been connected with solder, often used in electronics or plumbing contexts. The term emphasizes the result of the soldering process rather than the act itself.
- You may overemphasize the /r/ sound in the second syllable or insert an extra vowel, making it /ˈsɒl.ɚɪd/. Keep the second syllable as /-ərd/ with a quick, light /ɚ/ and avoid prolonging it. - Don’t drop the /l/ before /d/; that creates a mispronounced cluster. Focus on smoothly transitioning from /l/ to /d/. - Final consonant voicing matters: ensure /d/ is clearly voiced, not devoiced to /t/.
"The circuit board was soldered with a fine copper wire."
"After the repair, the joints were neatly soldered and insulated."
"She carefully soldered the broken tab back onto the connector."
Pronounced as /ˈsɒ.dərd/ in US/UK usage when syllabified as SOD-ered, with primary stress on the first syllable. In many US dialects the second syllable reduces to /-ərd/; in slower speech you’ll hear /ˈsɒl.dərd/ with a stronger /l/ and the /d/ at the end. Tip: start with a clear /s/ followed by a dark /ɒ/ (as in “cot”), then an unstressed /ər/ and a final /d/. IPA: US /ˈsɑː.dɚd/ or /ˈsɒl.dərd/, UK /ˈsɒldə d/; Australian /ˈsɒldə d/.
Common errors: 1) Mispronouncing the first vowel as /æ/ (like cat) instead of the back /ɒ/ or /ɑː/. 2) Dropping the /l/ or turning /ld/ into /l/ or /d/ clusters slowly. 3) Not clearly voicing the final /d/, making it sound like /t/. Correction: keep a short but audible /l/ before the /d/ and ensure the /ɒ/ or /ɑː/ is rounded and back. Practice with /ɒl/ or /ɑːl/ cluster and finish with /d/.
In US, you may hear /ˈsɒl.dɚd/ with rhotacization in the second syllable; UK may show /ˈsɒl.dəd/ or /ˈsɒldə d/ depending on speech rate; Australian often aligns with UK vowel qualities but maintains a slight /ɚ/ or /ə/ reduction in rapid speech. Key differences: rhoticity (US /ɚ/ vs non-rhotic UK /ə/), vowel length of the first syllable, and final syllable vowel quality before /d/.
It challenges you with the /s/ onset blending into a dark /ɒ/ vowel and the /ld/ cluster just before a voiced /d/. The tricky part is the transition from a back vowel to a liquid /l/, then quickly into /d/. Also, the final /d/ should be fully voiced even in fast speech. Practice by isolating /s/ + /ɒl/ + /d/ and then incorporate the /ə/ vowel in the second syllable.
A distinctive feature is the subtle schwa-like reduction in the second syllable in many fast speech patterns, turning /ər/ into a lighter /ə/ before the final /d/. Also, the first syllable maintains a rounded back vowel; the presence of the /l/ before /d/ adds a soft air flow that must be controlled to avoid a lisp-like blend. IPA cues: /ˈsɒ.lərd/ or /ˈsɒ.ləd/.
🗣️ Voice search tip: These questions are optimized for voice search. Try asking your voice assistant any of these questions about "soldered"!
- In US, maintain rhoticity; pronouncing /ɚ/ more clearly around stressed vowels helps clarity. Use relaxed jaw and a slightly raised tongue blade for /ɹ/ influence in rhotic dialects. - UK speakers often reduce the second syllable to /d/ or /də/; keep the /ɒ/ in the first vowel, and the /l/ clearly before /d/. - Australian English sits between non-rhotic UK and rhotic US tendencies; maintain a clear /l/ before /d/ and a shorter second vowel; IPA references: US /ˈsɔldəɹ/?; UK /ˈɒldə d/; AU /ˈsɒldə d/.
Soldered derives from the verb solder, which itself comes from the Old French souder, from soude, meaning ‘soda’ or ‘soda-line’ historically connected to metallic fluxes used in soldering. The root concept is to join metals through a fusible alloy. The Middle English form solderen, from Old English sōterian, reflects the same idea of binding materials. The modern noun/verb “solder” was influenced by Dutch and Germanic terms for alloying, with the spelling stabilized in English by the 16th–18th centuries as solder. The past participle “soldered” appears as English expanded its verb forms to indicate completed actions, especially in technical domains like electronics, plumbing, and metalwork. First known uses appear in technical manuals and craft treatises where precise joining methods were described, with “soldered” recording in 18th–19th century industrial texts as workers documented that joints were prepared, heated, and cooled to form solid electrical or mechanical bonds. The notion of soldering also carried metaphorical senses in early literature, highlighting connections and fusions in non-technical contexts, which gradually faded as the specialized engineering sense dominated. Over time, “soldered” has retained its emphasis on a manufactured bond achieved through precise heat and materials, and remains a staple term in manufacturing, electronics, and crafts.
💡 Etymology tip: Understanding word origins can help you remember pronunciation patterns and recognize related words in the same language family.
Help others use "soldered" correctly by contributing grammar tips, common mistakes, and context guidance.
💡 These words have similar meanings to "soldered" and can often be used interchangeably.
🔄 These words have opposite meanings to "soldered" and show contrast in usage.
📚 Vocabulary tip: Learning synonyms and antonyms helps you understand nuanced differences in meaning and improves your word choice in speaking and writing.
Words that rhyme with "soldered"
-ted sounds
Practice with these rhyming pairs to improve your pronunciation consistency:
🎵 Rhyme tip: Practicing with rhyming words helps you master similar sound patterns and improves your overall pronunciation accuracy.
