2 syllables: Be, vel. Stress on Be.
BEV-uhl
/ˈbɛvəl/
Bevel is pronounced BEV-uhl (/ˈbɛvəl/). It has two syllables (Be-vel), with the stress on "Be". Bevel (naɪn-ˈviːl in US; ˈbe-vəl in UK/US for the noun gloss). A bevel is an angled edge or surface cut, typically created to join planes at an angle other than 90 degrees. It denotes the sloped or chamfered edge on metal, glass, or woodworking pieces, often for safety, fit, or aesthetic purposes.
nounBevel (naɪn-ˈviːl in US; ˈbe-vəl in UK/US for the noun gloss). A bevel is an angled edge or surface cut, typically created to join planes at an angle other than 90 degrees. It denotes the sloped or chamfered edge on metal, glass, or woodworking pieces, often for safety, fit, or aesthetic purposes.
How to Pronounce Bevel
"The carpenter set the bevel to create a 45-degree edge on the base."
"The glass panel had a bevel so the light would refract softly along its edge."
"She added a bevel to the metal plate to ensure a flush joint."
Bevel is pronounced be-vel with the stress on the first syllable: /ˈbɛvəl/ in General American and /ˈbɛv.əl/ in many UK contexts. The first syllable has a short, open 'e' as in bed, the second is a schwa or unstressed 'ə'. Tip: keep the vowel short and the second syllable light. Listen for a crisp, single-syllable onset and avoid drawing out the first syllable. Audio references: you can compare to 'level' and 'bevels' in pronunciation tools.
Common errors include elongating the first syllable (be-VEHL) and turning the second syllable into a full vowel ('BEV-uhl' with stress mismatch). Some learners insert a stronger 'l' or pronounce the second syllable as a full vowel instead of a muted schwa. Corrections: keep the first syllable /ˈbɛ/ short and focused, then quickly reduce the second syllable to /əl/ or /əl/ with a light, quick ending. Practice with minimal pairs like bevel vs bevels and level to train timing.
US: /ˈbɛvəl/ with a clear first syllable and a light schwa second. UK: /ˈbɛ.vəl/ or /ˈbɛvl/ with similar rhythm but often a crisper consonant. AU: /ˈbɛvəl/ with non-rhotic tendencies sometimes (r-less), but bevel itself remains two syllables with a reduced final vowel. The main differences are vowel quality and the degree of syllable reduction; rhoticity influences the final absorption of any post-vocalic r, which bevel typically lacks. IPA references: US /ˈbɛvəl/, UK /ˈbɛv.əl/, AU /ˈbe-vəl/.
The challenge lies in the two-syllable structure with a short, stressed first vowel and a reduced second syllable. Learners often over-articulate the second syllable or insert a consonant cluster into the second syllable. Pay attention to coarticulation with adjacent sounds in real speech and the quick, light ending. Focus on maintaining even, short duration of the /ˈbɛ/ nucleus and a relaxed /əl/ ending, avoiding extra vowels.
Why is the final 'l' in bevel so subtle in many pronunciations, and how can you ensure a clean /l/ without adding extra vowel? In bevel, the ending /l/ is light and often vocalized as a syllabic or schwa-like release. You should aim for a soft, nearly silent coda with the tongue touching the alveolar ridge and the tip lowered slightly; avoid trailing the vowel or adding a post-vocalic r. Listen to careful enunciation in engineering contexts to compare to bevels in CAD drawings.
🗣️ Voice search tip: These questions are optimized for voice search. Try asking your voice assistant any of these questions about "Bevel"!
Bevel comes from early Middle English bevelen, likely related to the Old French bavelle meaning an edge or bevel, and to the verb beveler used by craftsmen to describe cutting or cutting-edge surfaces. The concept existed in the geometry of tiling and masonry before modern manufacturing, where beveling described a sloping edge at an angle to the face. The term appears in 14th–15th century texts on carpentry, with early usage emphasizing bevel-edged joints in timber framing. Over time, bevel broadened to describe any edge cut at an angle across materials (metal, glass, plastic), not just wood. The word’s primitive sense centers on sloped or chamfered edges, while modern usage extends to the precise angle specification in fabrication drawings and machining. First known uses are documented in craft manuals and treatises where bevel cuts were essential for joints and fittings. The spelling has remained relatively stable, with pronunciation variations aligning to regional norms. In manufacturing contexts today, bevels are quantified by bevel angle and width, often specified in technical drawings as degrees or as a chamfer specification. The word thus evolved from a practical carpentry term to a universal machining one, preserving its core meaning of an edge shaped away from 90 degrees.
💡 Etymology tip: Understanding word origins can help you remember pronunciation patterns and recognize related words in the same language family.
Help others use "Bevel" correctly by contributing grammar tips, common mistakes, and context guidance.
💡 These words have similar meanings to "Bevel" and can often be used interchangeably.
🔄 These words have opposite meanings to "Bevel" and show contrast in usage.
📚 Vocabulary tip: Learning synonyms and antonyms helps you understand nuanced differences in meaning and improves your word choice in speaking and writing.
Words that rhyme with "Bevel"
-me) sounds
Practice with these rhyming pairs to improve your pronunciation consistency:
🎵 Rhyme tip: Practicing with rhyming words helps you master similar sound patterns and improves your overall pronunciation accuracy.
